Industrial Model 3496/3550 Finger Jointer System

One (1) Used Industrial Model 3496/3550, High Production FingerJointer. This fingerjointer system consists of an Industrial Model 3496 dual fingerjointer shaper, S/N 3496L-6-1159 and 3496R-6-1259 and industrial Model 3550 S/N 12-17L1278 hydraulic assembly machine. See photos of Industrial Model 3496/3550, High Production Finger Joint System on our web site. Inventory No. 9894. Located at our Portland, Oregon facility.

The fingerjointer chain is a 
Bonfield BL-62003 cast-iron feed 
chain complete with lugs on 
9" centers frequency driven for 
a variable lug speed from 60-90 
lugs per minute.  Airbag pressure 
head system, complete with brush 
hold downs.  Included is an Apquip 
glue applicator.

The head motors are 10HP, and the 
trim saw motors are 3 HP.  Two sets 
of ACE 8 bolt hydra-lock cutterheads.

The Industrial Model 3550 assembly 
is a high production machine, equipped 
with hydraulic squeeze and carriage 
travel.  It is a continuous feed 
machine, having traveling cut-off-saw, 
enabling uninterrupted feed speeds, 
variable from 50 to 200 FPM.  
It has a 16' outfeed.

Infeed section to a flat top chain 
to eliminate any overlap problems, 
with side alignment rolls. This 
fingerjointer system was 
reconditioned by Bonfield Industrial 
Services in September of 1999, 
was in service for about 5 years.

Additional information contact:
Kathy Monks
USA Toll Free line: 866-292-6222
Or direct line: 360-379-6675
Fax: 360-379-6794
Email: [email protected]
Industrial Model 3496/3550 Finger Jointer System

Click thumbnails below to view larger image:

Would you like more specific information?

Your Name: Phone Number:
Email Address: Fax Number:
Company Name: Address:
Are you a used equipment reseller?


Website Design & Hosting by Starbelly Designs