Glass Edger Vertical Somaca Model ME-2

Serial No. 55040. New in 1989. Has extra grinding wheels. Appears to be in good condition; was purchased by a custom fixture company and was used very little. See photos and literature of Somaca Model ME-2 Vertical Glass Edger on our web site. Inventory No. 9472. Located at our Portland, Oregon facility.for brochure click on View PDF. View PDF

Glass Capacity; 
Thickness:1/8 to 1/2"
Length:	3-1/2 to 72"
Height:	72" maximum; 100" with optional extensions
Weight:	150-lb. maximum
Conveyor Speed:Variable from 0 to 72" per min.

Wheel Stations:
Grinding:3HP,3450RPM arbor motor,with 7"grinding  wheel
Polishing:2HP,1750 RPM motor, with 8" polishing   wheel
		
Both wheels have adjustments for 
height to set wheel depth, angularity 
for glass thickness, in/out for wheel 
centering on glass, and can be profiled 
for pencil or flat-seamed edges.

Spindle Load:Ammeters indicate load on each
Electrical:3-phase,60 hz, 230-volts,25 amps,3-wire
Weight:	Approximately 1750-lbs.
Options:Upright roller mounting rails to 
        handle glass height to 100"

Additional information contact:
Kathy Monks
MACHINERY SALES CO., INC.
USA Toll Free line: 866-292-6222
Or direct line: 360-379-6675
Fax: 360-379-6794
Email: [email protected]
Glass Edger Vertical Somaca Model ME-2

Click thumbnails below to view larger image:

Would you like more specific information?

Your Name: Phone Number:
Email Address: Fax Number:
Company Name: Address:
Are you a used equipment reseller?

 

Website Design & Hosting by Starbelly Designs